Rear fuse box ground point?!?! (for dashcam install)

[russyj]

Hi All,

After much reading here, decided to hardwire a Nextbase camera routing into the rear fuse box. Great idea, but I'm stuck with where to ground from? There's one bolt next to the fusebox which is innacessible for a wrench/socket due to the cables running above it, the only other I can get to is at the back where the seats meet the seatbacks but I'm worried about trapping the cable when people are sat on the seats. Anyone who's done this got any ideas? Pictures would also be greatly appreciated! I'm sure I'm missing something obvious!

Thanks!

Russ

[Abu Dhabi Dude]

Have a look in this thread:-

viewtopic.php?f=8&t=3694

[russyj]

Have a look in this thread:-

viewtopic.php?f=8&t=3694

Exactly what I was looking for, thank you! Didn’t think that was possible so I’ll have another go!

[Abu Dhabi Dude]

Have a look in this thread:-

viewtopic.php?f=8&t=3694

Exactly what I was looking for, thank you! Didn’t think that was possible so I’ll have another go!

No problem. Good luck!

[russyj]

For anyone who finds this thread in the future, the link above shows a viable ground point, you need a 10mm spanner to get at it, too little space to get a socket set in.

[fa147]

For anyone who finds this thread in the future, the link above shows a viable ground point, you need a 10mm spanner to get at it, too little space to get a socket set in.