WattCat - InControl remote app for Android

All Jaguar I-Pace related discussions
emgf
Posts: 1110
Joined: Mon Jul 09, 2018 12:31 pm
Location: Paris

Re: WattCat - InControl remote app for Android

Post by emgf » Mon Jun 01, 2020 3:19 pm

kermit68 wrote:
Mon May 25, 2020 6:34 pm
ardevd wrote:
Mon May 25, 2020 5:33 pm
kermit68 wrote:
Mon May 25, 2020 5:27 pm
Hi Ardevd, I just completed the charge and for the second time in row I'm getting quite high total kwh reported by Wattcat. Last time I got 85.3kwh, this time I'm getting 86.7 kwh. While I like those numbers, I'm not convinced that they are real. Could have changed something in the API ?
The only difference in those last two charging sessions compared to the others I had before is that I'm charging at 16A instead of 32A.
Remember that a number of different factors affect this, including temperature and cell balancing. and I'm assuming the weather in Rome is getting warmer these days? :)
Not that warm and in any case my car parked 2 levels below ground, the box temperature is quite stable, never below 10C in winter and never above 20C in summer. And 86.7 kwh is really a lot .... :mrgreen:
I got 84,7 kwh in Paris
SE Yulong White , light oyster interior , 20" Gloss Black , since October 2018 , IMC: S19C ... Telematics 18.2 , H264

kermit68
Posts: 330
Joined: Sat Sep 15, 2018 1:06 pm
Location: Rome / Italy

Re: WattCat - InControl remote app for Android

Post by kermit68 » Mon Jun 01, 2020 5:18 pm

Today I got 86.9 kwh after recharging from 35% to 82% with a 50 kw DC charger and final top up to 100% with home 16A AC charger. If the number are correct it means H264 unlocked not less than 2.5 kwh, maybe even more.
MY20 Yulong White SE, 20", air suspension, privacy glass, black pack and other fine stuffs

User avatar
ANBO
Posts: 38
Joined: Fri Mar 27, 2020 7:50 pm
Location: Switzerland

Re: WattCat - InControl remote app for Android

Post by ANBO » Mon Jun 01, 2020 8:18 pm

Last week I recorded 86.6 kWh and yesterday 87.1kWh. Charging at a 22kWh ChargePoint.
🇨🇭 EV400 HSE (MY2020; MAR 2020); 20" wheels
⚙️ H264 06.01.20 ⚙️ TMs: 18.2 ⚙️ ICM: 19C
⚙️ BECS: BP-AAE-BC-AC-BE ⚙️ Maps: 06.2020

ardevd
Posts: 1066
Joined: Mon Dec 24, 2018 12:30 am
Location: Norway

Re: WattCat - InControl remote app for Android

Post by ardevd » Mon Jun 01, 2020 8:48 pm

Is there any of you reporting high kWh values now who does not have the 20A InControl update installed?
Control your I-Pace with jlrpy or WattCat for Android| I-PACE HSE Ebny Prem Txt MY2019.

Telematics: 18.2 | InControl: 19C_19.46.4-458817

emgf
Posts: 1110
Joined: Mon Jul 09, 2018 12:31 pm
Location: Paris

Re: WattCat - InControl remote app for Android

Post by emgf » Mon Jun 01, 2020 9:25 pm

ardevd wrote:
Mon Jun 01, 2020 8:48 pm
Is there any of you reporting high kWh values now who does not have the 20A InControl update installed?
I don’t
SE Yulong White , light oyster interior , 20" Gloss Black , since October 2018 , IMC: S19C ... Telematics 18.2 , H264

sciencegeek
Posts: 234
Joined: Fri Nov 02, 2018 8:14 pm
Location: California

Re: WattCat - InControl remote app for Android

Post by sciencegeek » Mon Jun 01, 2020 10:53 pm

My 2020 shows 87.2 kWh right now, fully charged.

NB: based on linear correlation, which may not hold on the top and bottom ends, on both my former 2019 and my current 2020 the formulas for converting OBD SoC to API (WattCat) SoC are:
API SoC [kWh] = 1.1 x OBD SoC [kWh] - 5 kWh
API SoC [%] = 1.07 x OBD SoC [%] - 3%

kermit68
Posts: 330
Joined: Sat Sep 15, 2018 1:06 pm
Location: Rome / Italy

Re: WattCat - InControl remote app for Android

Post by kermit68 » Mon Jun 01, 2020 11:30 pm

ardevd wrote:
Mon Jun 01, 2020 8:48 pm
Is there any of you reporting high kWh values now who does not have the 20A InControl update installed?
My previous record high was on 19C, the number I reported earlier today is on 20A.
MY20 Yulong White SE, 20", air suspension, privacy glass, black pack and other fine stuffs

JLW
Posts: 21
Joined: Wed Jul 24, 2019 9:09 am
Location: New Zealand

Re: WattCat - InControl remote app for Android

Post by JLW » Tue Jun 02, 2020 12:59 am

Last recharge on 20A.

SmartSelect_20200601-081911_WattCat.jpg

Black on white HSE, 20" wheels, upgraded seats, pana, air and most of the other boxes ticked - owner since July 2019 - home charger Schneider 7.2kW with Bluetooth control since August 2019. All available updates applied.

Maxwell_400
Posts: 184
Joined: Mon Oct 14, 2019 10:09 am
Location: Norway

Re: WattCat - InControl remote app for Android

Post by Maxwell_400 » Tue Jun 02, 2020 7:26 am

New version of my favorite app, WattCat, thanks for your efforts @ardevd, much appreciated.

About the SoH%. I see that the number now pretty much follows the kW number. If I charge to 83kW, health is 82%, charge is 70kW, health is 69%. Is it correct to assume that the SoH now after 264, 280 is health/(xx kWh) * 100 ?
I-Pace SE++, MY20, 18" summer & winter, no panoroof, towbar, spare wheel, H264, H280, TCU 18.2, BECM: BP-AAE-BC-AC-BE

ardevd
Posts: 1066
Joined: Mon Dec 24, 2018 12:30 am
Location: Norway

Re: WattCat - InControl remote app for Android

Post by ardevd » Tue Jun 02, 2020 7:37 am

Maxwell_400 wrote:
Tue Jun 02, 2020 7:26 am
New version of my favorite app, WattCat, thanks for your efforts @ardevd, much appreciated.

About the SoH%. I see that the number now pretty much follows the kW number. If I charge to 83kW, health is 82%, charge is 70kW, health is 69%. Is it correct to assume that the SoH now after 264, 280 is health/(xx kWh) * 100 ?
It's possible. I agree that the value seems consistent but who knows what JLR is doing behind the scenes here.
Control your I-Pace with jlrpy or WattCat for Android| I-PACE HSE Ebny Prem Txt MY2019.

Telematics: 18.2 | InControl: 19C_19.46.4-458817

Post Reply